Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 518

Specifications of Basic I/O Units and High-density I/O Units
CS1W-OD232 Transistor Output Unit (32 Points, Sourcing)
Rated Voltage
Operating Load Voltage
Range
Maximum Load Current
Leakage Current
Residual Voltage
ON Response Time
OFF Response Time
Load Short-circuit Prevention
Insulation Resistance
Dielectric Strength
No. of Circuits
Internal Current Consumption 5 V DC 270 mA max.
External Power Supply
Weight
Accessories
482
24 V DC
20.4 to 26.4 V DC
0.5 A/point, 2.5 A/common, 5.0 A/Unit (See note.)
0.1 mA max.
1.5 V max.
0.5 ms max.
1.0 ms max.
Detection current: 0.7 to 2.5 A
Automatic restart after error clearance. (Refer to page 499.)
20 M between the external terminals and the GR terminal (100 V DC)
1,000 V AC between the external terminals and the GR terminal for 1 minute at a leakage
current of 10 mA max.
32 (16 points/common, 2 circuits)
20.4 to 26.4 V DC, 70 mA max.
210 g max.
One connector for external wiring (soldered)
Appendix A