Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 509

Specifications of Basic I/O Units and High-density I/O Units
CS1W-OC201 Contact Output Unit (8 points)
Max. Switching Capacity
Min. Switching Capacity
Relay replacement
Service Life of Relay
ON Response Time
OFF Response Time
No. of Circuits
Number of Inputs ON Simulta-
neously
Surge Protector
Fuses
Insulation Resistance
Dielectric Strength
Internal Current Consumption 100 mA 5 V DC max. 48 mA 26 V DC (6 mA
Weight
Circuit Configuration
Terminal Connections
Note Terminal numbers A0 to A9 and B0 to B9 are used in this manual, but they are not printed on the Unit.
2 A 250 V AC (cos = 1), 2 A 24 V DC (16 A/Unit), 0.1 A 120 V DC
1 mA 5 V DC
NY-24W-K-IE (Fujitsu Takamizawa Component Ltd.)
Relays cannot be replaced by users.
Electrical: 150,000 operations (resistive load)/100,000 operations (inductive load)
Mechanical: 20,000,000 operations
Service life will vary depending on the connected load. Refer to page 497 for information
on service life according to the load.
15 ms max.
15 ms max.
8 independent contacts
8
None
None
20 M between external terminals and the GR terminal (500 V DC)
2,000 V AC between the external terminals and the GR terminal for 1 minute at a leakage
current of 10 mA max.
260 g max.
Output indicator
*
2 A 250 VAC,
2 A 24 VDC,
0.1 A 120 VDC max.
No. points ON)
OUT
OUTc
c0
A0 0
c1 B0 L
A1 1
c2 B1 L
A2 2
c3 B2 L
A3 3
c4 B3 L
A4 4
c5 B4 L
A5 5
c6 B5 L
A6 6
* A relay contact is used,
c7 B6 L
A7 7
so there is no polarity
B7 L
NC A8
B8 NC
when a DC power supply
NC A9
B9 NC
is used.
Appendix A
473