Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual page 70

Configuration Devices
Note
34
Name
Programming Con- CS1W-CN114
sole Connecting
Cables
CS1W-CN224
CS1W-CN624
Programming Device CS1W-CN118
Connecting Cables
(for peripheral port)
CS1W-CN226
CS1W-CN626
Programming Device XW2Z-200S-CV
Connecting Cables
(for RS-232C port)
XW2Z-500S-CV
XW2X-200S-V
XW2X-500S-V
Battery Set CS1W-BAT01
Space Units CS1W-SP001
CS1D-SP001
CS1D-SP002
Expansion Rack CS1D-ATT02
Cable Mounting
Bracket
CS1D-ATT01
1. A Host Link (SYSWAY) connection is not possible when connecting a CX-
Programmer via Peripheral Bus Connecting Cable for the peripheral port.
Use a peripheral bus connection.
2. A peripheral bus connection is not possible when connecting a CX-Pro-
grammer via RS-232C Connecting Cable.
Model
Connects the CQM1-PRO01-E Pro-
gramming Console. (Length: 0.05 m)
Connects the CQM1-PRO27-E Pro-
gramming Console. (Length: 2.0 m)
Connects the CQM1-PRO27-E Pro-
gramming Console. (Length: 6.0 m)
Connects IBM PC/AT or compatible
computers.
D-Sub 9-pin receptacle (For converting
between RS-232C cable and peripher-
als) (Length: 0.1 m)
Connects IBM PC/AT or compatible
computers.
D-Sub 9-pin (Length: 2.0 m)
Connects IBM PC/AT or compatible
computers.
D-Sub 9-pin (Length: 6.0 m)
Connects IBM PC/AT or compatible
computers.
D-Sub 9-pin (Length: 2.0 m), Static-
resistant connector used.
Connects IBM PC/AT or compatible
computers.
D-Sub 9-pin (Length: 5.0 m), Static-
resistant connector used.
Connects IBM PC/AT or compatible
computers.
D-Sub 9-pin (Length: 2.0 m
(See note 2.)
Connects IBM PC/AT or compatible
computers.
D-Sub 9-pin (Length: 5.0 m)
(See note 2.)
For CS Series only.
Mount to an unused I/O slot.
Mount to an unused Power Supply Unit
slot (same shape as PA207R).
Mount to an unused Power Supply Unit
slot (same shape as PD024).
Mounting Bracket to prevent accidental
disconnection of the Expansion Rack's
cable (for a Duplex CPU, Dual I/O
Expansion System)
Mounting Bracket to prevent accidental
disconnection of the Expansion Rack's
cable (for a Duplex CPU, Single I/O
Expansion System)
Section 2-2
Specifications