Cpu Bus Unit Setting Area Capacity - Omron CS1D DUPLEX SYSTEM - 10-2009 Operation Manual

CPU Bus Unit Setting Area Capacity

CS-series CPU Bus Units
26-V Voltage Group

2-13 CPU Bus Unit Setting Area Capacity

108
Name
Controller Link Unit
Serial Communications Units
SYSMAC LINK Unit
Ethernet Unit
DeviceNet Unit
Loop Control Unit
Note NT-AL001 Link Adapters consume an additional 0.15 A each when used.
Add 0.04 A for each CJ1W-CIF11 RS-422A Adapter that is used.
Add 0.20 A for each NV3W-M@20L Programmable Terminal that is used.
Name
Relay Output Units
Analog I/O Unit
Analog Input Unit
Analog Output Unit
Isolated Thermocouple Input Unit CS1W-PTS01-V1
Isolated Resistance Thermome-
ter Input Unit
Isolated Ni508 Resistance
Thermometer Input Unit
Isolated 2-wire Transmission
Device Input Unit
Isolated DC Input Unit
Isolated Control Output Unit
(Analog Output Unit)
Power Transducer Input Unit
DC Input Unit (100 mV)
Isolated Pulse Input Unit
Customizable Counter Unit
Settings for most CPU Bus Units and Inner Boards are stored in the CPU Bus
Unit Setting Area in the CPU Unit. Refer to 8-22 Parameter Areas for details.
The CPU Bus Units are allocated the required number of words for settings
from this area.
There is a limit to the capacity of the CPU Bus Unit Setting Area of 10,752
bytes (10 Kbytes). The system must be designed so that the number of words
Model Current consumption (A)
CS1W-CLK21-V1 0.33
CS1W-CLK11 0.47
CS1W-CLK12-V1 0.58
CS1W-CLK52-V1 0.65
CS1W-SCU21-V1 0.30 (See note.)
CS1W-SLK21 0.48
CS1W-SLK11 0.47
CS1D-ETN21D 0.38
CS1W-ETN21 0.38
CS1W-ETN01 0.40
CS1W-ETN11 0.40
CS1W-DRM21-V1 0.29
CS1W-LC001 0.36
Model
CS1W-OC201
CS1W-OC211
CS1W-MAD44
CS1W-AD04-
V11/081-V1
CS1W-DA041/08V 0.18
CS1W-DA08C
CS1W-PTS02
CS1W-PTS03
CS1W-PTW01
CS1W-PDC01
CS1W-PMV01
CS1W-PTR01
CS1W-PTR02
CS1W-PPS01
CS1W-HCA22-V1
Section 2-13
Current consumption (A)
0.006 per ON output point
0.006 per ON output point
0.20
0.10
0.25
0.15
0.15
0.15
0.16
0.15
0.16
0.08
0.08
0.16
0.15