Plc Setup Settings; Startup And Cpu Unit Settings; Timing And Interrupt Settings - Omron CP1E CPU UNIT SOFTWARE User Manual

7-2

PLC Setup Settings

7-2-1

Startup and CPU Unit Settings

Startup Data Read Setting
1 Clear Held Memory (HR/DM/CNT) to Zero
2 Read D0- from backup memory
3 Number of CH of DM for backup
Startup Mode Setting
1 Startup Mode Setting
Execute Process Settings
1 Stop CPU on Instruction Error
2 Don't register FAL to error log
3 Do not detect Low Battery
(N/NA-type CPU Unit only)
7-2-2

Timing and Interrupt Settings

Timing and Interrupt Settings
1 Watch Cycle Time
2 Constant Cycle Time
CP1E CPU Unit Software User's Manual(W480)
Name
Do not clear.
Do not read.
0
Name
Run: RUN mode
Name
Do not stop.
Register.
Do not detect.
Name
1 s
No setting (variable)
Default Possible settings
Do not clear.
Clear.
Do not read.
Read.
E-type CPU Unit: 0 to 1,499
N/NA-type CPU Unit: 0 to 6,999
Default Possible settings
Program: PROGRAM mode
Monitor: MONITOR mode
Run: RUN mode
Default Possible settings
Do not stop.
Stop.
Register.
Do not register.
Do not detect.
Detect.
Default Possible settings
Other than initial setting (any)
1ms
:
1,000 ms
Setting
1ms
:
1,000 ms
7 PLC Setup
When setting is read by
CPU Unit
When power is turned ON
When power is turned ON
When power is turned ON
When setting is read by
CPU Unit
When power is turned ON
When setting is read by
CPU Unit
At start of operation
When power is turned ON
Every cycle
When setting is read by
CPU Unit
At start of operation
At start of operation
7-3
7