Table of Contents
Advertisement
18-5-2 Force-set/Reset Bits
Input bits can be controlled from CX-Programmer regardless of input status from the input devices. This
is used to establish input and output conditions when performing trial operation, or to see the effect of
establishing conditions when debugging.
Bits that can be Force-set/Reset
• I/O bits
• Word Area bits (W)
• Timer Completion Flags
• Holding Area Bits (H)
• Counter Completion Flags
Precautions for Safe Use
Always check the safety of the system before force-setting or force-resetting a bit and before
releasing forced status.
Force-setting
Force-setting a bit.
1
Set the CP1E operating mode to either MONITOR or PROGRAM mode.
2
Move the cursor to an input condi-
tion for the input bit that is to be
force-set.
CP1E CPU Unit Software User's Manual(W480)
18 Programming Device Operations
18
18-25
Advertisement
Table of Contents
