Table of Contents
Advertisement
4
Click the Yes Button.
5
Click the OK Button.
This completes transferring the lad-
der program.
18-4-4 Starting Operation
To start operation, turn ON the power or change the operating mode to RUN mode.
Precautions for Correct Use
Precautions for Correct Use
Operation will not be started when the power is turned ON if the PLC Setup is set so that the
PLC enters PROGRAM mode at startup.
Use the following procedure to change the operating mode to RUN mode. To perform trial operation for
debugging or adjustments, change the operating mode to MONITOR mode.
Precautions for Safe Use
Always confirm the safety of the controlled system before changing to MONITOR or RUN mode.
CP1E CPU Unit Software User's Manual(W480)
18 Programming Device Operations
18
18-21
Advertisement
Table of Contents
Need help?
Do you have a question about the CP1E CPU UNIT SOFTWARE and is the answer not in the manual?
Questions and answers