Omron CP1E CPU UNIT SOFTWARE User Manual page 258

14 Serial Communications
List of FINS commands
FINS commands are shown below.
Command
Type
code
I/O memory 01 01
area access
01 02
01 03
01 04
Parameter 02 01
area access
02 02
02 03
Operating 04 01
mode
change
04 02
System con- 05 01
figuration
read
Status read 06 01
06 20
Time infor- 07 01
mation
access
07 02
Message 09 20
display
related
Debugging 21 03
related
23 01
23 02
14-32
Name
I/O memory area read
I/O memory area write
I/O memory area write all at once
I/O memory area mixed read
Parameter area read
Parameter area write
Parameter area write (clear) all at
once
Operating mode change (Operation
start)
Operating mode change (Operation
stop)
CPU Unit information read
CPU Unit status read
Cycle time read
Time information read
Time information write
Message read/cancel
Error log pointer clearance
Force-set/reset
All bits release
Function
Read the contents of continuous I/O memory area
Write the contents of continuous I/O memory area
Replenish the specified ranges of I/O memory area
with the same data
Read the contents of discontinuous I/O memory
area
Read the contents of continuous parameter area
Write the contents of continuous parameter area
(unable to execute in MONITOR or RUN mode)
Replenish the specified ranges of parameter area
with the same data
Change the operating mode of CPU Unit to RUN or
MONITOR mode
Change the operating mode of CPU Unit to PRO-
GRAM mode
Read CPU Unit information
Read the status information of CPU Unit
Read cycle time (MAX, MIN, AVERAGE)
Read present year, month, day of the month, hour,
minute, second, day of the week
Change present year, month, day of the month,
hour, minute, second, day of the week
Read FAL and FALS
Clear all the pointer of error log to zero
Force-set, force-reset and release (unable to spec-
ify multi-bit)
Release the forced status of all bits
CP1E CPU Unit Software User's Manual(W480)