Instruction Functions; A-1-1 Sequence Input Instructions - Omron CP1E CPU UNIT SOFTWARE User Manual

Appendices
A-1

Instruction Functions

The CP1E CPU Units support the following instructions.
Refer to the CP1E CPU Unit Instructions Reference Manual (Cat. No. W483) for details.
A-1-1 Sequence Input Instructions
Instruction Mnemonic
LOAD LD
LOAD NOT LD NOT
AND AND
AND NOT AND NOT
OR OR
OR NOT OR NOT
AND LOAD AND LD
A-2
Variations Symbol/Operand
@/%/!/!@/!%
Bus bar
Starting point
of block
@/%/!/!@/!%
Bus bar
Starting point
of block
@/%/!/!@/!% Symbol
@/%/!/!@/!% Symbol
@/%/!/!@/!%
Bus bar
@/%/!/!@/!%
Bus bar
---
Logic block Logic block
Function
Indicates a logical start and creates an ON/OFF execution condi-
tion based on the ON/OFF status of the specified operand bit.
Indicates a logical start and creates an ON/OFF execution condi-
tion based on the reverse of the ON/OFF status of the specified
operand bit.
Takes a logical AND of the status of the specified operand bit and
the current execution condition.
Reverses the status of the specified operand bit and takes a logi-
cal AND with the current execution condition.
Takes a logical OR of the ON/OFF status of the specified operand
bit and the current execution condition.
Reverses the status of the specified bit and takes a logical OR
with the current execution condition.
Takes a logical AND between logic blocks.
LD
Logic block A
to
LD
Logic block B
to
Serial connection between
AND LD
logic block A and logic block B.
CP1E CPU Unit Software User's Manual(W480)