REP 12.11 Finisher Right Cover
Parts List on
PL 12.10 Item 2
Removal
NOTE: The option harness is fed through the Right Cover and retained by a small cover.
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Separate the Finisher from the printer,
2.
Remove 3 screws (1 metal, 2 plastic) that secure the cover,
Figure 1 Remove the right cover screws
3.
Release 2 hooks that secure the option connector cover to the Right Cover and remove
the harness through the slot provided,
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
WARNING
GP
14.
Figure
1.
Figure 2 Release the option connector and harness
5/2011
4-137
Repairs
REP 12.11