About This Guide
Document Purpose and Intended Audience
This guide contains information needed to set up, configure, and operate Hotwire
Time Division Multiplexer Symmetric Digital Subscriber Line (TDM SDSL)
Standalone Termination Units, Models 7974-A2, 7975-A2 and 7976-A2, and is
intended for installers and operators.
New Features for this Release
This version of the Hotwire TDM SDSL Standalone Termination Units, Models
7974-A2, 7975-A2, and 7976-A2, User's Guide adds new payload rates for the
Model 7976-A2.
Document Summary
7900-A2-GB21-20
Section
Chapter 1, About Standalone
TDM SDSL Termination Units
Chapter 2, Using the
Asynchronous Terminal Interface
Chapter 3, Initial Startup and
Configuration
Chapter 4, Configuring the Unit
Using the Internal Switches
Chapter 5, IP Addressing
Chapter 6, Security
December 2001
Description
Describes the unit's features and capabilities.
Provides instructions for accessing the user interface
and navigating through the screens.
Provides procedures for setting up the user interface
and for configuring the unit using the asynchronous
terminal interface.
Provides procedures for configuring the unit using the
internal switches instead of the asynchronous
terminal interface.
Provides information and examples regarding IP
addresses.
Presents procedures for creating a login, setting the
effective access levels, and controlling SNMP
access.
vii