About This Guide; Document Purpose And Intended Audience; Document Summary - Paradyne 7974 User Manual

About This Guide

Document Purpose and Intended Audience

Document Summary

7900-A2-GB21-00
This guide contains information needed to set up, configure, and operate the
Hotwire Multirate Symmetric Digital Subscriber Line (M/SDSL) Standalone
Termination Unit, Models 7974-A2, 7975-A2 and 7976-A2, and is intended for
installers and operators.
Section Description
Chapter 1 About the Hotwire Standalone Termination Unit. Describes
the unit's features and capabilities.
Chapter 2 Using the Asynchronous Terminal Interface. Provides
instructions for accessing the user interface and navigating
through the screens.
Chapter 3 Initial Startup and Configuration. Provides procedures for
setting up the user interface and for configuring the unit
using the asynchronous terminal interface.
Chapter 4 Configuring the Unit Using the Internal Switches. Provides
procedures for configuring the unit using the internal
switches instead of the asynchronous terminal interface.
Chapter 5 IP Addressing. Provides information and examples
regarding IP addresses.
Chapter 6 Security. Presents procedures for creating a login, setting
the effective access levels, and controlling SNMP access.
Chapter 7 Monitoring and Troubleshooting. Describes using the LEDs,
status messages, and network statistics to monitor the unit
and detect and correct problems.
Chapter 8 Testing. Provides information about available tests and test
setup.
August 2000
vii