Overview - Matrox 4Sight-II Installation And Hardware Reference

28 Chapter 2: Connecting peripherals to the unit
Important

Overview

This chapter describes how to connect various devices to the Matrox 4Sight-II
unit.
Serial
ports
Video input connector
Audio input (top)
and output (bottom)
In addition to connecting them, some devices must be configured to properly
interact with Matrox 4Sight-II. For information on the configuration procedure,
please refer to your operating system-specific, Matrox 4Sight-II software manual.
The front and back panels of Matrox 4Sight-II provide connection to:
• A USB mouse and keyboard.
• One or two high-resolution monitors.
• An NTSC/PAL video display device, such as a TV monitor.
• A DVI display device (such as a digital flat panel screen).
• A local area network (LAN).
• A video input device.
Back panel
Auxiliary I/O port
Power button (top)
and
Power connector (bottom)
USB connectors (bottom)
Front panel
IEEE 1394
connectors
analog VGA connectors
Ethernet jack (top)
and
Parallel port (top)
and
DVI-compliant digital VGA connector (bottom)
(#1 - top)
(#2 - bottom)