Removing The Matrox 4Sight-Ii Chassis - Matrox 4Sight-II Installation And Hardware Reference

Warning

Removing the Matrox 4Sight-II chassis

To remove the Matrox 4Sight-II chassis:
1. Unplug the Matrox 4Sight-II power cord.
2. Remove the appropriate screws on the Matrox 4Sight-II unit's front panel.
remove this
screw
3. With the Matrox 4Sight-II unit laid flat, face the back panel, place your hands on
top of the chassis and slowly slide the chassis so that the top and front panels
(which are attached) separate from the back and bottom panels (which are also
attached).
Removing the Matrox 4Sight-II chassis
Front panel
remove these nuts
remove these nuts
Back panel
47
remove this
screw