Additional Components - Matrox 4Sight-II Installation And Hardware Reference

Additional components

You might have purchased one or more of the following additional components
to complete your unit:
Additional component
Matrox Imaging software
packages
Matrox frame grabbers for
PC-104/Plus
Matrox opto-coupling
module and socket block
Standard 15-pin
VGA-TO-5BNC cable
DBHD44-TO-13BNC cable
DBHD44-TO-13BNC/O
cable with a high density
44-pin connector
DBHD44-TO-8BNC cable
Inspecting your Matrox 4Sight-II package
Details
Please refer to the software manual for details on Matrox Imaging software
compatible with Matrox 4Sight-II.
• Matrox Meteor-II/Standard.
• Matrox Meteor-II/Multi-Channel.
• Matrox Meteor-II/Digital (includes the special front panel to
accommodate the Digital Video in connector).
• Matrox Meteor-II /Camera Link (includes the special front-plate to
accommodate the two Camera Link connectors).
• Matrox Orion /Standard for 4Sight-II.
• Matrox Orion /RGB for 4Sight-II.
• Matrox Orion /Dual for 4Sight-II.
If purchased with Matrox 4Sight-II, these devices will be pre-installed in
your unit.
Used to connect external I/O devices to your unit's auxiliary I/O interface.
If ordered with the integrated-unit version, the module will replace the
standard auxiliary I/O connector.
This cable is used to connect an NTSC/PAL display device to the
secondary analog VGA connector on Matrox 4Sight-II.
Used for interfacing to either:
• A Matrox Orion module for 4Sight-II.
• A Matrox Meteor-II/Standard frame grabber.
Six adapter cables for Y/C input (BNC-TO-SVHS) are shipped with the
DBHD44-TO-13BNC cable.
Also used for interfacing to the Matrox Meteor-II /Standard frame grabber
and Matrox Orion modules for 4Sight-II.
This is an open-ended version of the DH44-TO-13BNC cable.
It is required for connection to special input and output signals, such as
synchronization, control, and DC power output.
Used for interfacing to a Matrox Meteor-II /Multi-Channel frame grabber.
Three adapter cables for Y/C input (BNC-TO-SVHS) are shipped with the
DBHD44-TO-8BNC cable.
23