Matrox 4Sight-II Installation And Hardware Reference page 125

Power Menu 125
Options:
- 100% (default)
- 75%
- 50%
- 25%
• HDD Standby Timer:
This item allows you to enable/disable the standby timer of the hard disk
connected to your Matrox 4Sight-II unit. When Enabled, the timer is set to 21
minutes. If the hard disk remains inactive for a period longer than 21 minutes,
the hard disk is switched to idle mode. Note that it might take a few seconds to
reactivate the hard disk after being in idle mode.
Set this item to Disabled for time critical applications that cannot wait for the
activation of the hard disk after being in idle mode.
Note that this feature might not function with certain older hard disks.
Options:
- Disabled
- Enabled (default)