Hardware Supplied; Hardware Required; Installation Overview - Matrox ATC RG-200DL User Manual

Overview
Thank you for purchasing a Matrox ATC RG product. This product is a complete remote graphics
solution. ATC RG-200DL units can support up to two monitors. These monitors can be dual or single
link digital monitors or analog monitors. ATC RG-400SL units can support up to four digital or
analog monitors. As a remote graphics solution, it separates the CPU and hard disks of your system
from the computer peripherals – monitors, keyboard, mouse, and audio hardware.

Hardware supplied

Matrox ATC RG remote graphics unit
(ATC RG-400SL shown)
* Multiple power cables are provided for international support.

Hardware required

Matrox PCI or PCIe interface card
(PCI card shown)

Installation overview

To install your Matrox product:
Install your interface card –
1
Connect your ATC RG unit, monitors, and other peripherals –
2
page
2 Matrox RG Series – User Guide
(sold separately)
see "Hardware installation", page
7.
4 DVI-to-HD15 adapters
(ATC RG-400SL only)
Dual LC optical cable
(
50 µm/125 µm or 62.5 µm/125 µm
*
Power supply
)
4.
see "Connection setup",