Table of Contents
Advertisement
60 Chapter 4: Installing the Matrox 4Sight-II motherboard in a custom chassis
Warning
Overview
This chapter provides general guidelines when using a custom chassis to house the
Matrox 4Sight-II motherboard. It also lists specifications to safely connect a
custom power-supply and fan. In addition to this chapter, any specific instructions
included with your custom components should also be read.
If you purchased the Matrox 4Sight-II integrated unit, you can skip this chapter.
To protect the Matrox 4Sight-II motherboard against static electricity, follow the
precautions mentioned in Handling precautions, found in Chapter 1.
Custom chassis
The Matrox 4Sight-II motherboard complies with the EBX form factor
(5.75" x 8").
Make sure the chassis provides clearance for all motherboard components,
particularly the SDRAM module and any PC/104-Plus boards. Also ensure that
there are adequate ventilation openings near the fan and the processor.
To avoid injury, be careful of sharp corners and rough edges when mounting the
chassis.
Advertisement
Table of Contents
