Tv-Out Options Submenu - Matrox 4Sight-II Installation And Hardware Reference

Options:
- Disabled (default)
- Enabled
- Auto
If the Legacy Diskette A: menu item, found in the Main menu, is set to
❖
Disabled, you will not be able to access or enable the floppy controller on the
parallel port. Be sure to first enable the legacy diskette drive.
If you disconnect your floppy disk drive, be sure to change this setting's option
❖
to Disabled. If not, the floppy disk controller will override the use of the parallel
port for any other function. Also be sure to reconfigure the settings of the
Parallel port menu item.

TV-Out Options submenu

• TV Encoder:
This item allows you to activate the TV encoder on the second analog VGA port
before the display driver is launched, so that the BIOS and OS boot-up can be
viewed on the screen.
The setting of this menu item has effect only when the display is in text mode,
that is, before the display driver is launched by the operating system. After the
display driver is loaded, the display is in graphic mode, and the TV encoder is
automatically activated.
Options:
- Disabled (default)
- Enabled
Advanced menu 123