Matrox 4Sight-II Installation And Hardware Reference page 127

the problem, or resume the boot. By selecting Disabled, Matrox 4Sight-II will
ignore any recoverable error it encounters and continue with the boot process. For
more information about recoverable errors, see the section entitled BIOS messages
and diagnostic codes.
Options:
- Enabled (default)
- Disabled
• Max boot failure:
This item allows you to enable the automatic loading of the default BIOS settings
after 3 consecutive unsuccessful boots. Note that in the unlikely event that your
BIOS settings (saved in CMOS) are incorrect, and you have chosen the Disable
option for this item, your Matrox 4Sight-II unit can become unusable. If this
occurs, contact Matrox.
Options:
- Disabled
- Enabled (default)
• Summary Screen:
This item allows you to enable or disable the display of a summary screen.
By selecting Enabled, the BIOS displays a system summary-screen during
boot-up, after POST. You must then press any key or wait 30 seconds to continue
with the boot process. By selecting Disabled, the BIOS does not display the
summary screen and automatically continues the boot process after POST.
Options:
- Enabled (default)
- Disabled
Boot menu 127