Table of Contents
Advertisement
Options:
- Disabled
- Enabled
- Auto (default)
• Interface:
This item allows you to configure serial port B, either to the RS-232 standard or
to the RS-422/RS-485 standard. The RS-422/RS-485 standard can support
higher data rates and has greater immunity to electrical interference.
Options:
- RS-232 (default)
- RS-485
• Parallel port:
This item allows you to enable or disable the parallel port.
By selecting Disabled, the parallel port is not configured and is turned off. It also
frees up IRQ 7 and I/O addresses 378h to 37Fh. By selecting Enabled, the port
is turned on, but requires you to enter the base I/O address. The number of the
IRQ used cannot be changed. The available base addresses will be displayed. By
selecting Auto, the BIOS configures the parallel port's base address during POST.
Options:
- Disabled
- Enabled
- Auto (default)
Advanced menu
121
Advertisement
Table of Contents
