Table of Contents
Advertisement
110 Appendix B: BIOS reference
Once you have your IDE/ATAPI devices connected to Matrox 4Sight-II, you
could configure them further by using the following submenus:
• Primary Master submenu.
• Primary Slave submenu.
• Secondary Master submenu.
• Secondary Slave submenu.
The following items are available for all master and slave submenus:
• Type:
This item allows you to select the type of device that is connected to the specified
ATA-44 connector.
By selecting Auto, the drive itself provides the correct device information. This
process is called autotyping. By selecting User, you must specify various device
characteristics (such as multi-sector transfers, LBA mode control, and transfer
mode). The details of these characteristics are specified later in this section.
Options:
- Auto (default)
- None
- IDE Removable
- ATAPI Removable
Advertisement
Table of Contents
