Digital Video Input Connectors ("Digital Video In") - Matrox 4Sight-II Installation And Hardware Reference

Use Matrox cable DBHD44-TO-13BNC to interface video sources through
Matrox 4Sight-II's video input connector to a Matrox Meteor-II /Standard frame
grabber (designed for Matrox 4Sight-II), or any version of the Matrox Orion
modules for 4Sight-II. The cable has thirteen BNC connectors, and a high-density
44-pin D-Subminiature male connector.
To interface Matrox Orion /Standard or /RGB for 4Sight-II or Matrox Orion
/Dual for 4Sight-II with Y/C cameras, you will also need the BNC-TO-SVHS
adapter cables.
Use Matrox cable DBHD44-TO-8BNC to interface video sources through
Matrox 4Sight-II's video input connector to a Matrox Meteor-II /Multi-Channel
frame grabber (designed for Matrox 4Sight-II).
Create your own cable to access special signals supported by Matrox Meteor-II
/Camera Link, such as special user input and output signals, through the 44-pin
video input connector of Matrox 4Sight-II.
For customers planning to build their own cable, parts can be purchased from:
Manufacturer
Connector

Digital video input connectors ("Digital Video in")

Two digital video input connectors ("Digital Video in") are only available when
Matrox Meteor-II /Digital is purchased. The two connectors are more specifically
68-pin, VHDCI female connectors. Their pinouts are outlined in the following
tables.
pin 1
pin 34
Pin 68
Pinouts of back panel connectors
NorComp Interconnect Devices
HDT44P
Connector 1 Connector 1
Connector 2 Connector 2
175
pin 68
pin 34
pin 1
pin 35