Table of Contents
Advertisement
136 Appendix B: BIOS reference
sequence. To boot from another device of this type, you must access the Boot
menu of the Setup program, and change its positioning. See step 4 for more
information.
3. When the device is selected, press Enter.
This will override the existing boot sequence (as specified in the BIOS Setup
utility) for this boot only, and the operating system will be booted using the device
you selected.
If the device you specified cannot load the operating system, the BIOS will revert
to the boot sequence specified in the BIOS Setup utility.
4. Included in the selections is the Enter Setup option. By choosing this, you will
be brought to the BIOS Setup program's Boot menu, where you will be able to
permanently change the order of devices from which the BIOS attempts to boot
the operating system.
5. To exit the boot-device selector utility and continue with the existing boot
sequence, press Esc.
This utility overrides the BIOS settings for the current boot, but returns to the
original settings for any subsequent boot. The advantage of this utility is that you
do not have to enter the BIOS Setup program to change the settings, and then
enter the program a second time to change these settings back to their original
configuration.
Advertisement
Table of Contents
