Table of Contents
Advertisement
130 Appendix B: BIOS reference
Expanding and
collapsing device
types
Main
Advanced
QuickBoot Mode:
SETUP prompt
POST Errors:
Max boot failure: [Enabled]
Summary screen:
Floppy check:
AC/Power Loss:
Expanded indicator
Same device type
F1
Help
Esc
Exit
Note that a "+" sign next to a device type means that there are one or more such
devices connected to the unit. For example, in the previous figure the Hard Drive
option has a "+" sign next to it.
Selecting a device type that has a "+" sign next to it and pressing Enter expands
the option, showing all the devices of the same type connected to your unit. An
expanded version might look like this:
Matrox 4Sight-II Setup Utility
Power
Boot
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Stay Off]
Removable Devices
-Hard Drive
Bootable Add-in Cards
Primary Master
Secondary Master
ATAPI CD-ROM Drive
I.B.A. Slot 0058
#$
Select Item
-/+
Enter
Select Menu
fg
Note that there is now a "-" sign next to the Hard Drive option. This indicates
that the option has been expanded, and can be collapsed by pressing Enter again.
When a device-type option is expanded, you can change the boot sequence
position of the devices listed, by highlighting the device and using the + and - keys
to move your selection. For example, if you expand the hard drive option, you can
have Matrox 4Sight-II try to boot from the secondary master before the primary
master.
Info
Exit
Item Specific Help
Change Values
Select
Sub-Menu
Select a device using
the
Up
or
Down
keys.
Change the position of
the device using the
+
and keys.
-
F9
Setup Defaults
F10
Save and Exit
Advertisement
Table of Contents
