Matrox 4Sight-II Installation And Hardware Reference page 147

Flash Code Possible Error
1-3-1-1 The DRAM refresh process is not working
properly.
1-3-1-3 The 8742 keyboard controller failed POST.
1-3-3-1 The DRAM is defective, or not present.
1-3-4-1 RAM failure.
1-3-4-3 RAM failure.
1-4-1-1 RAM failure.
1. If your unit either displays a flash code not listed in the above table, hangs without
displaying any flash code, or continues to hang after the suggested solutions were
implemented, please contact Matrox.
BIOS messages and diagnostic codes
Suggested solution
Reseat the dual inline memory
module (DIMM).
Verify and reconnect the keyboard
cable.
Reseat the DIMM.
Reseat the DIMM.
Reseat the DIMM.
The installed DIMM cannot be used
on Matrox 4Sight-II due to hardware
incompatibility.
147