Creating Custom Cables - Matrox 4Sight-II Installation And Hardware Reference

Pin
13
14
15
16
17
18
19
20
21
22
23
24
25
26

Creating custom cables

In certain cases, you will have to create and use custom cables when interfacing
external devices to Matrox 4Sight-II. These situations include:
• Interfacing LVTTL devices to the auxiliary I/O interface.
• Interfacing parallel devices to the internal connector of the parallel interface.
• Interfacing a floppy disk drive to the parallel port connector.
Signal
GND
GND
LVTTL I/O 10
LVTTL I/O 11
LVTTL I/O 12
LVTTL I/O 13
LVTTL I/O 14
LVTTL I/O 15
2
I C_CLK (do not use)
GND
2
I C_DAT (do not use)
Not connected
GND
Power supply, 3.3 V (do not use)
Creating custom cables 185