Table of Contents
Advertisement
46 Chapter 3: Adding devices to the Matrox 4Sight-II motherboard
Introduction
The Matrox 4Sight-II integrated unit is designed to accommodate selected
hardware additions. The following diagram provides a reference to motherboard
connections:
Internal auxiliary
I/O connector
If you have purchased the integrated-unit version of Matrox 4Sight-II, the first
step in making hardware additions involves removing the chassis cover. Once
removed, you will have access to all the connectors located on the motherboard.
The following sections outline how to remove the chassis cover, as well as how to
connect various IDE devices, PC/104-Plus boards, memory modules, parallel
devices, a floppy disk drive, and external devices that connect to the auxiliary I/O
interface.
Back Panel
PC/104-
Plus
TM
expansion site
Front Panel
DIMM slot
Internal
ATA-44connectors
Advertisement
Table of Contents
