Matrox 4Sight-II Installation And Hardware Reference page 115

• Reset Configuration Data:
This item allows you to clear or maintain the Extended System Configuration
Data (ESCD) area. The BIOS accesses the ESCD area during the boot process,
to access information about the plug-and-play devices connected to the unit.
By selecting No, the ESCD area is maintained, and the BIOS configures the
devices according to the specifications in this area, resulting in a faster boot. By
selecting Yes, the ESCD area is cleared and reconfigured.
If an IRQ conflict occurs after you install a new device, change this menu item's
setting to Yes to have the BIOS clear and reconfigure the ESCD area upon
rebooting. This might rectify the conflict. Upon rebooting, this menu item is
automatically reset to No.
Options:
- No (default)
- Yes
• Power Off Immediate:
This item allows you to select the method used to turn off your unit. Note that
changing the setting of this menu item has no effect if a power button driver is
installed on your unit under Windows NT.
By selecting Enabled, the unit will turn off immediately after you press the power
button. By selecting Disabled, the unit will turn off only after you push and hold
the power button for four seconds.
Disabling the Power-Off Immediate feature acts as a safety precaution so that your
unit is less likely to be turned off by accident.
Options:
- Disabled (default)
- Enabled
Advanced menu 115