Installation Overview - Matrox Corona Installation And Hardware Reference

18 Chapter 1: Introduction
More information
Conventions
Need help?

Installation overview

The installation procedure consists of the following steps:
1. Complete the hardware installation as described in
Chapter 2. If you have any problems, refer to Appendix A.
2. Complete the software installation as described in
Chapter 3.
3. Familiarize yourself with the MGA PowerDesk by reading
Chapter 4.
For information on using multiple Matrox Corona boards, refer
to Chapter 5, and for hardware information, refer to Chapter 6.
For technical specifications and connector pinout descriptions,
see Appendix B.
Note that in this manual, the term Host refers to your PC.
Also note that we refer to and give examples specific to MIL-Lite
in this manual. However, anything that can be accomplished
with MIL-Lite can also be accomplished with MIL, ActiveMIL,
and Matrox Inspector.
Appendix A offers solutions to potential problems. If your
Matrox Corona installation questions are not answered in this
manual, contact your local Matrox representative, Matrox
sales, or Matrox customer support (see the Customer Support
section at the back of this manual for telephone numbers).
In the unlikely event of a failure, the warranty and Product
Assistance Request Form at the back of this manual outlines
return conditions and procedures.
1. Most items can be accomplished with Matrox Inspector.
1