Matrox 4Sight-II Installation And Hardware Reference page 35

1 Signal Composite camera input connector
BNC#
1 VID_IN1 Camera 1
2 VID_IN2 Camera 2
3 VID_IN3 Camera 3
4 VID_IN4 Camera 4
5 VID_IN5 Camera 5
6 VID_IN6 Camera 6
7 VID_IN7 Camera 7
8 VID_IN8 Camera 8
9 VID_IN9 Camera 9
10 VID_IN10 Camera 10
11 VID_IN11 Camera 11
12 VID_IN12 Camera 12
13 OPTOTRIG
External trigger input (OPTOTRIG+)
The following signals are only available on Matrox Orion /Dual for 4Sight-II when the cable is connected to video input connector 2.
1 VID_IN13 Camera 13
2 VID_IN14 Camera 14
3 VID_IN15 Camera 15
4 VID_IN16 Camera 16
5 VID_IN17 Camera 17
6 VID_IN18 Camera 18
7 VID_IN19 Camera 19
8 VID_IN20 Camera 20
9 VID_IN21 Camera 21
1. The wire color associated with each BNC number can be found on the color code pinout chart included with the DBHD44-TO-13BNC cable.
2. Note that RGB cameras can only interface with Matrox Orion /RGB modules.
3. OPTOTRIG- is connected to the ground of the trigger source, and passes through the cable shield.
4. Note that LVTTL_TRIG2 has a 5 V tolerance Schmitt trigger input.
The thirteen BNC wires connect to the different cameras as such:
Y/C camera input connector
Y (camera 1)
C (camera 1)
Y (camera 2)
C (camera 2)
See following table
See following table
See following table
See following table
Y (camera 5)
C (camera 5)
Y (camera 6)
C (camera 6)
3
External trigger input (OPTOTRIG+)
Y (camera 7)
C (camera 7)
Y (camera 8)
C (camera 8)
Y (camera 11)
C (camera 11)
Y (camera 9)
C (camera 9)
Y (camera 10)
Connecting video input devices
RGB camera input connector
R (camera 1)
G (camera 1)
B (camera 1)
SYNC (camera 1)
R (camera 2)
G (camera 2)
B (camera 2)
SYNC (camera 2)
Not connected
Not connected
Not connected
Not connected
3 External trigger input
3
(OPTOTRIG+)
-
-
-
-
-
-
-
-
-
35
2