Table of Contents
Advertisement
Among the other items in the Boot menu, the device boot-sequence will be
displayed. Devices with higher boot priority (that is, devices that are checked first)
will be displayed towards the top of the list. The default device sequence is
presented below:
1. Removable Devices (such as a floppy disk drive)
2. Hard Drive
3. ATAPI CD-ROM Drive
4. I.B.A. Slot 0058
To change the position of a device on the list, highlight it by using the Up and
Down keys. You can then move the selection up or down by using the + and - keys.
Main
Advanced
Power
QuickBoot Mode:
SETUP prompt
POST Errors:
Max boot failure
Summary screen:
Floppy check:
AC/Power Loss:
Boot Order:
Collapsed indicator
#$
F1
Help
Select Item
Esc
Exit
Select Menu
fg
1. This option is only available for Matrox 4Sight-II units with an Intel 82551QM
Ethernet Controller and a BIOS version 1.05 or higher. See the Info menu section for
more information on type of Ethernet Controller and version of BIOS installed on
your Matrox 4Sight-II unit.
1
Matrox 4Sight-II Setup Utility
Boot
Info
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Stay Off]
Removable Devices
+Hard Drive
ATAPI CD-ROM Drive
I.B.A. Slot 0058
-/+
Change Values
Enter
Select
Exit
Item Specific Help
Select a device using
the
Up
or
Change the position of
the device using the
+
and keys.
-
F9
Sub-Menu
F10
Boot menu
Down
keys.
Setup Defaults
Save and Exit
129
Advertisement
Table of Contents
