Video Input Connector On The Pci Form Factor - Matrox Meteor-II Installation And Hardware Reference Manual

46 Appendix B: Technical information
PC/104-Plus form
factor
Matrox Meteor-II for the PC/104-Plus form factor (stand alone version) has four
interface connectors: video input, a PC/104-Plus (PCI) connector, and two
PC/104 (ISA) connectors.
PC/104-
(PCI)
connector
Note that the video input connector for the PC/104-Plus board built for
Matrox 4Sight-II is right-angled, unlike the one for the stand-alone version,
discussed here. See Note about Matrox Meteor-II /Multi-Channel for PC/104-Plus in
Chapter 2 for more details.

Video input connector on the PCI form factor

The video input connector is a high density DB-44 female connector on the PCI
form factor. Its pinout is as follows:
Pin Signal
15 VID1_IN1
44 VID1_IN2
13 VID1_IN3
43 SYNC_IN
11 VID2_IN1
Plus
Video input
connector
pin 15
pin 44
pin 30
Description
RED Analog Video Input (Channel 1).
GREEN Analog Video Input (Channel 1).
BLUE Analog Video Input (Channel 1).
Analog Video Input (SYNC).
RED Analog Video Input (Channel 2).
PC/104
(ISA)
P1 and P2
connectors
P2
P1
pin 1
pin 31
pin 16