Table of Contents
Advertisement
4-8 Export of Log Files
Thermo Fisher Scientific
For a quick and accurate analysis of errors the log files can be exported
and sent to the customer.
Proceed as follows:
1. Plug the included USB stick into the USB ports (see Chapter: 1-3
interfaces)
2. Press the "Diagnosis"
3. Press "Logs / Param."
4. Press "Log File"
5. Use the Up and Down buttons at the top of the log table to choose
the day on which the event needs to be analyzed.
6. Press "Export" There are two files
"DataLog ..." and "STPLog ...." Stored on the USB stick.
7. Two files, STPLog and DataLog, are stored on the USB. Wait for
the "Export" button to appear.
8. Now you can remove the USB stick and plug it into your PC to
send the data via email
Note!
You can export the log files only if no protocol is running.
troubleshooting and Errors
Export of Log Files
User Guide STP420D/STP420ES
103
Advertisement
Table of Contents
