Configuring Qtegra Isds; Qtegra User Groups; Turn On The Log File (Journal) - Thermo Scientific iCAP 7000 Series Manual

iCAP 7000 Series ICP-OES Spectrometer

5 Configuring Qtegra ISDS

Note: Do not start Qtegra yet.

5.1 Qtegra User Groups

Check the Windows Groups have been set-
up on the computer.
This can be viewed from:
Control Panel/Administrative
Tools/Computer Management/Local Users
and Groups/Groups.
QtegraAdministrator, QtegraManager and
QtegraUser should be visible.
If the groups have not been set-up make
sure the Windows login being used is the
PC Administrator.
5.2 Turn on the Log file
(Journal)
Once the installation is complete the
"Journal" LOG needs to be turned on as
follows
Locate Configurator in C:\Program Files
(x86)\Thermo\Qtegra\Binaries\Configurator.
exe.
Run this Application
Select Settings and scroll down to
Logging/Show all
Set Misc/value to True.
Do not close Configurator.exe
Note:- The Journal/Log will be available in Qtegra.
This is required for iCAP Service work and should always be left on.
Page 17 of 36
Note: If Qtegra does not start check the Windows
access for Qtegra.
User Groups Checked
Installation Details
□
Version 4301 460 00632