Setting The Date And Time - Thermo Scientific Barnstead Nanopure Life Science 2114 Series Operating Manual And Parts List

Section 9
User Settings
Setting the Date and
9-2 Nanopure Life Science (UV/UF)
Note Time values are displayed in 24 hr. military time. For example;
6:00p.m. = 18:00:00 = hr./min./sec.).
Time
1. From the (Idle) mode, when the display reads, "Nanopure (Idle)
xx:xx:xx xx/xx/xx," press the UP or DOWN arrow until display reads,
"Advanced Menu?"
2. Press ENTER.
3. Press ENTER when the unit displays "Printer Attached?"
4. When prompted with "Date Format" press the UP or DOWN arrow
to show the date format desired. Press ENTER to select the desired
format and continue.
5. When prompted with "Set Date," press the UP or DOWN arrow to
choose "Yes," then press ENTER.
6. Press the UP or DOWN arrow until you reach the desired month.
Press ENTER.
7. Press the UP or DOWN arrow until you reach the desired day. Press
ENTER.
8. Press the UP or DOWN arrow until you reach the desired year. Press
ENTER.
9. When prompted with "Set Time", press the UP or DOWN arrow to
choose "Yes," then press ENTER. This is to set the time of day.
10. Press the UP or DOWN arrow until you reach the desired hour value.
Press ENTER.
11. Press the UP or DOWN arrow until you reach the desired minute
value. Press ENTER.
12. Press BACK twice to return to the (Idle) mode.
s
Thermo Scientific