Table of Contents
Advertisement
Table 38. Sample Details Screen Descriptions
Screen Location
1.
Selected Sample
2.
Sample Position
3.
Rack Position
4.
Process as
Specimen
5.
Edit Sample ID
6.
STAT Test Order
7.
Add Test Order
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Figure 30. Sample Details Screen (Example)
Description
The tube location for the chosen sample is
highlighted on the Sample Rack graphic.
Location of the sample in the Sample Rack.
Location of the Sample Rack in the Sample Bay.
Check this box to process the selected
control/calibrator as a specimen (see Running
Controls/Calibrators as Specimens on page 127).
Select this button to edit the Sample ID of a test order
with an auto-generated or manually entered SID.
Select this button to schedule the selected test order
to be run in the next available MTU time slot (see
Scheduling STAT Test Orders on page 126).
Select this button to add test orders to the sample.
Overview
69
Advertisement
Table of Contents
