Reflex Testing Configuration Screen; Figure 44. Quality Control Configuration Screen-Manufacturer's Controls/Calibrators Tab (Example); Table 49. Quality Control Configuration Screen Button Descriptions (Manufacturer's Controls/Calibrators Tab) - Hologic Panther System Operator's Manual

Figure 44. Quality Control Configuration Screen—Manufacturer's
Table 49. Quality Control Configuration Screen Button Descriptions
(Manufacturer's Controls/Calibrators Tab)
Screen Buttons
1. Add
2. Edit
3. Delete

Reflex Testing Configuration Screen

To access the Reflex Testing Configuration screen, select the Reflex Testing
Configuration button on the Administration screen (see Administration Screen on page
76).
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
Controls/Calibrators Tab (Example)
Description
Select this button to override the mean and
standard deviation values on the Levey-Jennings
Report for a manufacturer control/calibrator.
Select a control/calibrator from the table and then
select this button to edit the mean and standard
deviation values for the chosen manufacturer
control/calibrator.
Select a control/calibrator from the table and then
select this button to delete the override values for
the selected quality control/calibrator.
Overview
87