Table of Contents
Advertisement
1. Select the desired field to set the warning (yellow) and/or critical (red) test count
threshold.
A keypad window opens.
2. From the keypad window, select the desired level that will generate a system alert.
3. Select OK when finished.
4. Select Save.
5. Shut down and restart the software by selecting the Instrument Shutdown button on
the Logoff/Shutdown screen when in the Setup or Ready state. Restart the software
from the Desktop Shield by selecting the Panther button.
Priming Management
Use the options available in the Priming Management expansion menu to choose and
schedule automated system priming.
When scheduled, the system will perform a prime if the criteria in the Prime Instrument
section are met (see Prime Criteria on page 105).
Select and configure the following options within the menu:
Table 98. Priming Management Options
Option
Enable
Automatic
Priming
Automatic
Priming Time
Enable Automatic Priming
To schedule automated priming:
1. From the expanded Priming Management menu on the System Configuration screen,
check the Enable Automatic Priming cell.
2. Select the Automatic Priming Time field.
An Automatic Priming Time window opens.
3. From the clock on the window, select the desired time for the system to perform a
prime.
4. Select OK when finished.
5. Check the boxes for the days of the week that the automated priming should occur.
If all priming criteria are met at the selected day and time, the system will perform a
prime at this scheduled time until the configuration settings are changed.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Description
Check this cell to enable and schedule automated priming.
Additional instructions provided below.
Check this cell to configure the system to perform a prime at the
chosen time and on select days of the week.
System Administration
222
Advertisement
Table of Contents
