Table of Contents
Advertisement
4. Select one of the following two (2) data categories in order to set the desired purge
parameters:
Purge everything before—To purge all results before the selected Results
l
completed on or before date and time.
Purge everything between—To purge all results between the selected Results
l
completed after and Results completed on or before dates and times.
5. Select the date and time calendar icon for the chosen field(s).
6. From the calendar, set the dates and times for the appropriate categories and then
select OK.
7. Ensure that the Only purge results if they have been transmitted to LIS cell is
checked or left blank as desired.
8. Select Accept.
9. Select Yes to confirm the purge request.
The system purges the results that fall within the selected date and time interval. If
the Only purge results if they have been transmitted to LIS cell was checked,
only transmitted results are purged.
Configuration
From the System Configuration screen, define the options shown below according to the
instructions provided in the associated sections. After changes have been made, select
Save to retain the new configuration settings. If a restart is required, it will be stated inside
the screen name as Restart Needed.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Figure 108. Purge Results Window (Example)
System Administration
218
Advertisement
Table of Contents
