Assay Reagent Loading
Use the option available in the Assay Reagent Loading expansion menu to configure the
assay reagents loading process as needed.
Select and configure the following option within the menu:
Table 99. Assay Reagent Loading Options
Option
Default
Reconstitution
Date Selection
Default Reconstitution Date Selection
To set the reconstitution date selection default:
1. From the expanded Assay Reagent Loading menu on the System Configuration
screen, select the Default Reconstitution Date Selection field.
The Assay Reagent Loading window opens.
Figure 109. Assay Reagent Loading Window (Example)
2. From the window, select the desired default for the system to use during reagent
loading.
3. Select OK when finished.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Description
Check this cell and select one of the two (2) options to
configure how the reconstitution date is entered by the
operator when loading a new assay reagent kit. The
software must be restarted before the selected configuration
setting is enabled in the software.
Additional instructions provided below.
System Administration
223