Table of Contents
Advertisement
Table 68. Sample Rack Status Color Legend (Continued)
Icon Color
Black
Green
Yellow
Red
Blue
"P"
"C"
"E"
"R"
Run Status Screen
Use the Run Status screen to monitor sample status and run processing for
samples currently loaded on the system. The panels on the Run Status screen
provide information for the loaded samples, results timing, assay reagents, and
control/calibrator status.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Meaning
Empty sample position.
Test order(s) have been associated with sample
tube.
Sample is currently being pipetted by the system.
Do not remove the Sample Rack from this
lane.
Invalid sample.
Pipetting of all associated test orders is complete.
Sample is not able to be run due to an associated
pending item. The "P" is removed after the
associated pending item(s) have been
addressed.
Control or calibrator tube.
Sample preparation error occurred during
processing. Refer to associated message on the
Messages screen for cause of the error. Retest
affected sample as necessary.
Specimen tube with a test order of a configured
screening assay (assay type found in the Assay
column on the Reflex Testing Configuration
screen). The "R" is removed after the reflex test
designation process has been completed.
Note—The tube icon may appear as green,
yellow, or blue, depending on pipetting status.
System Operation
145
Advertisement
Table of Contents
