Table 71. Reports - Hologic Panther System Operator's Manual

Select the Reports button on the Menu Bar to access the Report Menu screen. All reports
can be created from this screen.
The following table describes the reports available through the Panther System Software:

Table 71. Reports

Report
Activity Log Report
Assay Reagent Report
Configuration Report
Diagnostics Log Report
Exceptions by Worklist
Report
Exceptions Report
Levey-Jennings Report
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
Description
A report log for all activities performed on
the system over the selected time frame
(see Activity Log Report on page 165).
Contains expiration and stability information
for matched sets of Panther assay reagents
that have been scanned into the system.
Use this report to assist in managing assay
reagent inventory that are on or off the
system (see Assay Reagent Report on
page 166).
Contains a summary of current system
configurations (see Configuration Report on
page 167).
A report log for all module activity over the
selected time frame (see Diagnostics Log
Report on page 168).
Contains invalid, equivocal, and positive
results for the selected criteria organized by
worklist (see Exceptions by Worklist Report
on page 170).
Contains invalid, equivocal, and positive
results for the selected criteria (see
Exceptions Report on page 171).
Contains assay control data for the chosen
assay control/calibrator, or external quality
control data plotted on a Levey-Jennings
chart for the selected duration (see Levey-
Jennings Report on page 173).
System Operation
160