Table of Contents
Advertisement
Selecting Reports
Select the appropriate parameters from the Report Menu screen to generate the
needed report. Select the report type from the menu and then choose the content
specifications in the associated parameter menu.
To create a report with the desired information:
1. From the Reports screen, select the report type from the Name column in the
Report Menu.
The parameter menu to the right of the screen updates as appropriate for the
chosen report type.
Figure 81. Report Parameters for Results Report (Example)
2. Check the cells in the parameter menu as appropriate to select the desired report
criteria.
Note—For some parameters, checking the cells in the menu will expand
the menu to allow for more specific information to be selected.
3. Select or complete the information fields as necessary for the report type.
Calendars, assay menus, and virtual keyboards will appear on screen as
appropriate.
4. After supplying the parameter information, select View at the bottom of the Report
Menu screen to open the report.
The selected report window opens. Navigate the report by using the navigation
bar located at the bottom of each report. Refer to the Navigating Reports section
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
System Operation
162
Advertisement
Table of Contents
