User Comment; Filter Results - Hologic Panther System Operator's Manual

Operator—The user name(s) of the operator(s) that performed any system tasks
l
associated with the test order.
Results DB ID—System database identification number for the result.
l
Test Order DB ID—System database identification number for the test order.
l
Sample DB ID—System database identification number for the sample.
l
AR Kit DB ID—System database identification number for the assay reagent kit
l
used to process the test order.
Order Type—The way in which the test order was assigned to the specimen.
l
Possible values are below:
1. LIS—The test order was assigned through the connected LIS.
2. Automatic—The test order was assigned based upon the Sample Defaults
setting.
3. Manual—The test order was assigned through the Sample Details or the
Sample Rack Loading screen.
Assay Version—Assay software version used to process the test order.
l
3. Select Done to return to Results screen.

User Comment

Record comments for invalid controls or calibrators through the User Comment
functionality on the Results screen.
To add a user comment to an invalid control or calibrator:
1. From the Results screen, select the row of the desired invalid control or calibrator.
2. Select User Comment.
The Add or Update User Comment window opens.
3. Select the open space on the window and then enter the comment using the
virtual keyboard.
4. When finished entering the note, select OK or Enter on the virtual keyboard.
5. Select Accept when finished adding the comment.
The information is then associated with the result record and can be viewed
through the Results screen by selecting the User Comment button again.

Filter Results

Select Filters on the top left of the table to filter the display so that the desired
information is shown. After selecting Filters, select the appropriate button and
provide the necessary information. Filter categories can be used in combination.
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
System Operation
154