Table of Contents
Advertisement
Monitoring Results Timing
The time to result is displayed for each order in the Completion Time column
on the Results screen (see Results Screen on page 73). The column is updated
to reflect any changes in assay processing.
The Results panel on the Run Status screen provides the number of sample
results generated during the time that the instrument last transitioned to the
Assay Processing state (see Run Status Screen on page 70).
The number of results displayed in the Results field resets the next time the
system transitions out of the Assay Processing state. The time for the last result
will update as new samples are loaded onto the system.
Results Management
The system generates a unique result for each processed test order. View, edit, verify,
compile, and export results according to the guidance provided in this section.
Viewing Results
Use the Results screen to view test results. Results are available for viewing
immediately following the completion of assay processing. The Results screen can
be used to monitor all test order parameters including the sample status, completion
time, associated assay, results flags, LIS status, rack position and worklist ID. The
Sample Curve Report is available depending on certain software configurations.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Figure 75. Assay Reagents Panel (Example)
Figure 76. Results Panel (Example)
System Operation
150
Advertisement
Table of Contents
