Set Maintenance Tasks To Required; Figure 102. Maintenance Task Details Screen-Clean Sample Shield (Example) - Hologic Panther System Operator's Manual

Figure 102. Maintenance Task Details Screen—Clean Sample Shield (Example)

Set Maintenance Tasks to Required

Update the maintenance interval of desired tasks to force them to be performed according
to a chosen interval that is less than the defaults, as necessary. It is not possible to
process samples once a required task becomes past due. Only Administrators can
schedule maintenance tasks (see Adding Operator Accounts on page 240). Adjust the
maintenance settings at any time the system is in the Setup or Ready state.
To set a maintenance task to a required interval:
1. From the Maintenance Activities screen, select the maintenance task to be scheduled.
2. Select Edit.
The Edit Maintenance Task screen opens.
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
Maintenance
192