Table of Contents
Advertisement
Table 75. Diagnostics Log Report—Report Parameters
Filter
Creation Date
Show both
diagnostic and
non-diagnostic
messages
Severity
Priority
Event ID
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Description
The following three (3) choices are available for use
as a report filter:
Today
l
Yesterday
l
Range
l
Check the cell of the date range desired. Selecting
the Range cell opens a window to refine the date and
time range.
Check either Yes or No to display desired messaging
in the report. Selecting Yes displays additional system
communication messaging that is not shown on the
Messages screen.
The following six (6) choices are available for use as
a report filter:
Message
l
Warning
l
Problem
l
Critical
l
Fatal
l
Undefined
l
Check the Severity cell and then check the cell of the
system message category desired.
The following three (3) choices are available for use
as a report filter:
High
l
Low
l
Informational
l
Check the Priority cell and then check the cell of the
system message category desired.
Check the Event ID cell and enter the event ID for the
desired message in the open field.
System Operation
169
Advertisement
Table of Contents
