Deleting A Test Order - Hologic Panther System Operator's Manual

The Add Test Orders window closes.
13. Repeat Steps 2–12 to add test orders for any additional specimens in the
selected Sample Rack.

Deleting a Test Order

Delete test orders through one of the following two (2) screens:
Sample Details screen (see Sample Details Screen on page 68)
l
Test Orders screen (see Test Orders Screen on page 72)
l
To delete a test order through the Sample Details screen:
1. From the Sample Rack Bay screen, click the loaded rack with the specimen
(s) of interest or select the onscreen image of the desired Sample Rack and
select Rack Details.
The Sample Rack Loading screen opens for the selected Sample Rack.
2. From the Sample Rack Loading screen, click the specimen of interest or
select the Sample Details/Edit button and select the specimen of interest.
The Sample Details screen opens with the current test orders for the
selected specimen.
3. Select the test order to be deleted from the Test Orders panel.
4. Select Delete Test Order.
A confirmation window opens.
5. Select OK to confirm the deletion.
The test order is deleted.
6. Repeat Steps 2–5 to delete test orders for any additional specimen tube in
the selected Sample Rack.
To delete a test order through the Test Orders screen:
1. From the Test Orders screen, select the test order(s) to be deleted.
2. Select Delete.
A confirmation window opens.
3. Select OK to confirm the deletion.
The test order is deleted.
To delete a test order through the Sample Rack Loading screen:
1. From the Sample Rack Loading screen, select Remove All Test Orders.
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
Note—If test orders were added to the entire rack, an Add Tests for
Rack window appears to confirm tests will be added for all
specimens in the Rack. Select Yes to continue.
System Operation
125