Table of Contents
Advertisement
The Backup Panther Database screen opens with the default file save
destination.
5. Select the file directory button
necessary, and select OK.
6. Select Execute.
A current copy of the database is saved to the file destination. The screen
transitions back to the Desktop Shield screen following completion of the task.
Select Panther to initiate the Panther System Software.
Database Restore
Restore the database to a previously saved version. Do not restore the database
without the guidance of Hologic authorized personnel. Only administrators should
perform this task.
To restore the database:
1. Shut down the Panther System (see System Shutdown on page 187).
2. Start up the Panther System (see System Startup on page 92).
The Desktop Shield screen opens.
3. From the Desktop Shield screen, select Restore.
4. Enter the user name and password, if necessary, and select OK.
Note—The system does not require a user name and password if the
database was corrupted.
The Restore Panther Database screen opens with the default file location.
5. Select the file directory button
necessary, select the desired database file (.bak), and select OK.
6. Select Execute.
The software loads the selected database file upon software initiation. The
screen transitions back to the Desktop Shield screen following completion of the
task. Select Panther to initiate the Panther System Software.
Delete Database
Only perform this task under the guidance of a Hologic representative. This task
provides instructions for deleting saved copies of the database. Only administrators
should perform this task.
To delete the database:
1. Shut down the Panther System (see System Shutdown on page 187).
2. Start up the Panther System (see System Startup on page 92).
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
and choose a new file save destination, if
and choose the database file location, if
Maintenance
212
Advertisement
Table of Contents
